TERABYTE PLUS PACKAGE
Copyright (C) 2010-2015
By Rudolph R. Loew
The TeraByte Plus Package is a set of Tools and Patches that provide support
for Hard Drives with Larger Capacities and/or Larger Sector Sizes than was
possible previously with DOS and Windows 98 and 98SE.
Support is provided for Hard Drives up to 32768TiB (16TiB for USB Drives).
Extended Support is provided for 64-Bit Addressed SCSI and USB Drives.
Not tested due to no available Drives.
Logical Sector Sizes are supported up to 32KB in DOS and 4KB in Windows.
Larger Logical Sector Sizes can be emulated on Drives with smaller Sectors.
Support is added for Clusters up to 256 Sectors in length, allowing for
extra large FAT12 and FAT16 Partitions if needed.
Support provided for Multiple Extended Partitions per Drive.
Boot Support is added for all of these Configurations.
Native Mode SATA Support is provided to allow SATA Drives to be connected
directly to the Motherboard without using RAID Drivers.
Generic SATA Drivers are provided to support many SATA Controller Cards
including the JMicron PCI-E Cards.
The RFDISK Partitioning Utility provides Advanced Partitioning capability and
can Install a Multi-Boot Profile MBR that allows setting up Multiple Boot
Configurations selectable during Boot. This Package is also available
The RFORMAT Formatting Utility provides Advanced Formatting capability
allowing control over Partition Parameters such as Cluster Size, Reserved
Space, etc. This Package is also available separately.
The Universal Disk Boot Manager Package (BOOTMAN2) is an Overlay that
provides BIOS support for Hard Drives that are not supported by the
Motherboard's own BIOS. This Package is also available separately.
DOS, Windows 98 or 98SE compatable with English Version Patches.
Floppy Drive (for Floppy based programs)
CD/DVD Drive (for CD based programs)
No AHCI Only SATA Controllers Present
Contact Author for additional information.
To purchase this Software or additional copies of this Software for other
Send $99.95 US per copy to:
506 Bieling Rd.
Elmont, NY 11003
Payment can be made as follows:
2. Money Order drawn on a US Bank or Post Office
3. Personal Check drawn on a US Bank (Delivery made after Check clears)
4. International Postal Money Order accepted by the US Postal Service
5. Payment via Paypal to email@example.com
6. Western Union
Warning: International Checks or Money Orders, not described above, will not
be accepted and will not be returned without an additional $2 US handling
Delivery is by E-Mail. You MUST include the E-Mail address you want the
Software to be sent to. It will be a 1.1MB Zipped Attachment.
Please type or print your E-Mail address clearly. Sending me an E-Mail when
you place an order will insure that I have your correct E-Mail address.
For additional information or help placing your order,
I can be reached in the following ways: